Magnetic Pump Power Loss? Four Demagnetization Causes Explained
Pump losing power? Magnets gone bad. First Heat demag – root cause. Overheat kills magnets: eddy current, hot media, cooling fail. Second Dry run – no lube, bearing heat → magnet demag. Third Slippage – low torque, high density, overflow → slip and burn. Fourth Corrosion – media leaks in, eats coating and magnets. Avoid […]
Product Note: Enhanced Seal Flush Solution for High-Temperature Media
For high‑temperature medium working conditions, we adopt the 21‑type flush plan, combining metal bellows mechanical seals with heat exchangers. This solution upgrades on the basis of Plan 11 by adding coolers to enhance heat dissipation effectively, stabilizing the seal performance and extending service life for high‑temperature pumps. Our finished pumps with this optimized sealing system […]
