LC Stainless Magnetic Pump(Core product)

PRODUCT DESCRIPTION

LC magnetic pump adopts heavy-duty structural design, it can be customized and transport high gravity, large viscosity, high temperature, low temperature and other special working conditions, internal and external magnetic rotor adopts multi-stage combination design, it can be reasonable combination according to different power and density, from one to three easy combination. The main structure has three parts: Pump body, magnetic coupling and motor. The main principle is drive the external magnetic coupling through the motor, and the magnetic field passes through the “Isolation sleeve” to drive the inner rotor indirectly, thereby driving the impeller to rotate and realizing the purpose of non-leakage transmission. The pump adopts the building block principle design, without any shaft sealing device, no leakage. Easy installation and maintenance, all wearing parts can be repaired and replace. The pump adopts the excellent hydraulic model  abroad to improve the 3-8% efficiency, the isolation set is high-quality stainless steel (special conditions can be used titanium, hastelloy C ), greatly reducing the magnetic eddy current, the transmission medium temperature below 120℃of the large magnetic energy Ndfeb(neodymium iron boron), when the temperature is 120℃-350℃,high temperature samarium cobalt magnetic,the internal rotating parts are supported by double sliding bearings, the unilateral clearance is only 0.02mm, the operation is smooth without vibration and noise.

LC stainless steel magnetic pump with full seal, no leakage, high efficiency, energy saving, clean, environmental protection, low noise, low vibration, best choice for conveying flammable, explosive, corrosive and valuable liquids. Widely used in medicine, pesticides, petroleum, chemical industry, alkali, paper making, dyes, electronics, sewage treatment,the ideal transport equipment for lye, alcohol, various organic solvents.

MAIN USE

LC stainless magnetic pump is suitable for petroleum, chemical, pharmaceutical, smelting, electroplating, environmental protection, food, film and television printing,water treatment,national defense,is the transmission of flammable, explosive, volatile, toxic, rare precious liquid and all kinds of corrosive liquid ideal equipment. Suitable for conveying the suction pressure is not more than 0.2Mpa, the maximum working pressure is 1.6Mpa, the temperature is not more than 100℃, the density is not more than 1600kg/m³, viscosity is not more than 30×10-6m/s without hard particles and fibers.

PRODUCT PARAMETERS

PRODUCT STRUCTURE DIAGRAM